Car scales are used to determine the weight of loaded and empty cars. For example, trucks transporting liquid and bulk cargo, agricultural products, etc.

Automotive platform scales of the “Tarozi-M” series have a modular design, which ensures convenience and efficiency during their transportation and installation. They also feature a completely open central part of the loading platform. If necessary, this gap can be quickly closed with steel. There are various options for arranging ramps. Weighing is carried out when the vehicle is fully loaded onto the loading platform.

Vehicle scales on the Tarosi-M platform determine the total weight of the vehicle in static mode:

1. Weight limit – 20 – 100 tons.
2. The length of the loading platform is 5 – 22 m.
3. The total width of the loading platform is 3.0 m.
4. The working width of the loading platform is 3 m.
5. The measurement height is 210 mm.

Installation is carried out on a specially prepared reinforced concrete base. It is allowed to install a wall (at the level of the road surface).

The scale consists of large platforms 3.0 meters wide. This makes access easier; side barriers prevent vehicles from leaving.

The use of structural blocks simplifies and speeds up installation, so maintenance and repair are cheaper than monolithic construction.

The exposed portion of the loading dock can be quickly covered with sheet metal, making it durable and identical to traditional bridge construction.

Automobile scales “Tarozi-M” are produced in Uzbekistan. Equipment made of high-strength steel can withstand overloads of up to 150% during intensive use for more than 10 years.

Warranty – 2 years from the date of commissioning.

Characteristics:

1. Overload capacity: 100%
2. Accuracy class:III average
3. Operating temperature range, 0С:
   – load receiving platform (sensors)
   -50…+50
4. Degree of protection:
   – load receiving platform (sensors)
   – secondary measuring transducer IP 68, IP 56
5. Data transmission interface: RS 232/485

Equipment:

• Load receiving platform.
• Connecting beams.
• Set of strain gauges with supports.
• Balancing box.
• Connection cable.
• Cable to PC.
• Terminal
• Power supply to the terminal.
• Documentation set.